Renewable Design for Stainless Steel Ground Rod - Jointing Mold of Exothermic Welding System – ShiBang

Overview
Quick Details
Place of Origin:
Zhejiang, China (Mainland)
Brand Name:
SHIBANG
Model Number:
AF-G0310
Shaping Mode:
Preform Mould
Product Material:
Graphite
Product:
Exothermic Welding Mold
Item:
Jointing Mold of Exothermic Welding
Material:
Graphite
Service times:
50-100 times
Certification:
Assessed by CEPRI
System Concluding:
Graphite Mold, Flint Gun, Fastening Clamp, Metal Disc, Powder
Characters:
Cost-effective, no extra power required makes it portable
Operation:
Easy and no special skill required
Test:
Authorizated by professional third party

Supply Ability
Supply Ability:
10000 Set/Sets per Month

Packaging & Delivery
Packaging Details
Carton+pallet for Jointing Mold of Exothermic Welding
Port
Shanghai/Ningbo

Jointing Mold of Exothermic Welding System

Item Jointing Mold of Exothermic Welding System
Material Graphite, Ensure the high temperature resistance
System Concluding Graphite Mold, Flint Gun, Heat Resistant Glove, Fastening Clamp, Metal Disc, Powder, Steel Brush, Banister Brush, etc.
Characters Cost-effective, no extra power required makes it portable
 Service Life  Around 50 Times
 Operation  Easy and no special skill required
 Test  Authorizated by professional third party

Jointing Mold of Exothermic Welding System 

Jointing Mold of Exothermic Welding System is a simple, effective , quality welding method ,which weld the parts to desired size and type in graphite mould cave with overheat melting .Currently ,the Exothermic Welding replaced mechanical connection widely. As professional graphite mould supplier, our factory offer competitive graphite mould.

 

Graphite Mould :The mould is made of quality graphite body to obtain the perfect seal and lasting performance .The life of our mould can be 80-100 joints ,which is more lasting than other competitor’s

 

Exothermic welding powder: We mix the powder comply with your conductor’s material and size with reasonable ratio ,so the joint is more strong and more lasting.

 

Tool box: We offer the full sets tools to meet your demand ,including ignition gun ,brush ,wrench ,screwdriver and glove . It is a package box to meet your whole demand.

Jointing Mold of Exothermic Welding System

 

Notes:

1. Avoid contacting of hot molten metals with water, oil, grease, etc. It may cause excessive 

    spatter and burns

2. Do not uses in flammable vapors or dust, a fire or explosion may happen

3. Void fire, mould must be stored in dry, well-ventilated area, away from open flame and excessive heat

4. Avoid looking directly at the light of the reaction. It may irritate your eyes

5. Wear safety glasses and leather gloves to use the mould

 

 

Jointing Mold of Exothermic Welding System

1. IQC(Incoming Check)
2.  IPQC(Process Quality Control
3. First Piece Quality Control
4. Mass Products Quality Control
5. OQC(Outgoing Quality Control)
6. FQC(Final Quality Check)

 

 

Jointing Mold of Exothermic Welding System

XINCHANG SHIBANG NEW MATERIAL CO., LTD is one of the first-classed manufactures which integrated research and development and sales of lighting protection facility. SHIBANG is concentrating on producing lighting rods, nonmagnetic earth rod, copper clad steel ground rod, graphite ground module, chemical electrolytic ground pole, copper bonded steel tape, copper bonded stranded wire, copper busbar, all kinds of earthing clamps, exothermic welding mold and powder etc.

 

SHIBANG is located in Xinchang city, Zhejiang province, which is famous for tourism, north to Shanghai and east to Ningbo makes the transportation very convenient. With the complete and scientific management system, company has got approvals from worldwide clients on products quality and reputation. Welcome to vist SHIBANG, we are waiting for cooperation with your esteemed company from all over the world.

 Jointing Mold of Exothermic Welding System

   

1. Providing Professional Advises & Operation
2. Customer Service Online with 24 Hours
3. Full Inspection On All The Products Before Shipement
4. Free Logo Embossing
5. Shipping &Price Term: EXW;FOB;CIF;DDU
6. OEM & ODM Are all Available

 

 

Jointing Mold of Exothermic Welding System

 

1. Professional Operation Experience
2. The Sizes All Can Be Customised
3. Sample For Your Reference Available
4. Low MOQ, Low Price
5. Safe Packing & Prompt Delivery
6. Quality Guaranted: ISO9001:2008, UL, All Kinds of Test

 

 

      Jointing Mold of Exothermic Welding System

  

 Jointing Mold of Exothermic Welding SystemJointing Mold of Exothermic Welding SystemJointing Mold of Exothermic Welding System

Jointing Mold of Exothermic Welding SystemJointing Mold of Exothermic Welding System  Jointing Mold of Exothermic Welding System

 

 


  • Renewable Design for Stainless Steel Ground Rod - Jointing Mold of Exothermic Welding System – ShiBang Related Video: